What are some tips for using an HMD?

Sure, here are some tips for using an HMD:

• Start with two coals. This is a good starting point for most HMDs.
• Place the coals on the HMD evenly. This will help to ensure that the heat is distributed evenly.
• Adjust the coals as needed. If the smoke is too harsh, remove a coal or two. If the smoke is not strong enough, add a coal or two.
• Watch the smoke. The smoke should be a consistent stream of white smoke. If the smoke is intermittent or weak, the HMD is not hot enough.
• Clean your HMD regularly. This will help to prevent it from getting clogged and will help to keep it working properly.
• Experiment with different shishas and coals. There are many different shishas and coals on the market, so experiment to find what works best for you.

Here are some additional tips for using an HMD:

• Use natural coals, such as coconut coals, rather than quick light coals. Natural coals will produce a more consistent heat and will last longer.
• Heat your coals on a high heat setting. This will help them to heat up more quickly.
• Use a coal heater, such as a stovetop coil or a gas burner, to heat your coals. This will help them to heat up more evenly.
• Once your coals are heated, let them cool for a few minutes before using them with your HMD. This will help to prevent them from burning your shisha.
• If the smoke is too harsh, you can open the vents on the HMD. This will help to reduce the heat.
• If the smoke is not strong enough, you can close the vents on the HMD. This will help to trap the heat.
• If the HMD starts to get too hot, you can remove a coal or two. This will help to prevent the shisha from burning.
• If the HMD starts to get too cold, you can add a coal or two. This will help to keep the shisha hot.

With a little practice, you will be able to use your HMD to produce delicious, flavorful smoke.